9. Adımdaki Değişiklikler
Düzenleyen: Brett Hartt —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
[ [* icon_note] Before re-installing the primary chain inspection cover, make sure the rubber O-ring on the inside of the primary chain inspection hole is clean and properly seated. [* |
[ [* icon_note] Before re-installing the primary chain inspection cover, make sure the rubber O-ring on the inside of the primary chain inspection hole is clean and properly seated. [* |
[* black] Using a ''' T100 ''' Torx screw head, re-install the primary chain inspection cover. |