Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

9. Adımdaki Değişiklikler

Düzenleyen: Brett Hartt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Re-assembly
[* icon_note] Before re-installing the primary chain inspection cover, make sure the rubber O-ring on the inside of the primary chain inspection hole is clean and properly seated.
[* icon_note] Also make sure that the rubber o-ring iso-rings are clean and in proper condition before replacing the screws in the primary chain inspection cover.
[* icon_note] Also make sure that the rubber o-ring iso-rings are clean and in proper condition before replacing the screws in the primary chain inspection cover.
[* black] Using a 5/32" Hex or Allen screw head, re-install the primary chain inspection cover.