Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

10. Adımdaki Değişiklikler

Düzenleyen: Brett Hartt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Using a T27 Screwdriver head, reinstall the clutch inspection cover. Install the screws in the following order:
[* red] Top
[* orange] Bottom
[* yellow] Left
[* green] Right
[* icon_note] Once all of the screws have been lightly hand-tightened, use a torque wrench to tighten them to their proper specification of 84-108 Inch-Pounds7 - 12 ft-lbs (84 - 108 in-lbs). Tighten the screws in the same order as before.
[* icon_note] Once all of the screws have been lightly hand-tightened, use a torque wrench to tighten them to their proper specification of 84-108 Inch-Pounds7 - 12 ft-lbs (84 - 108 in-lbs). Tighten the screws in the same order as before.