iPod Touch 1st Generation Logic Board Replacement 6 No'lu Adım Geçmişi

6. Adımdaki Değişiklikler

Düzenleyen: Kevin M Cuddeback — 5 May 2013

Düzenlenme reddedildi tarafından David Hodson

	[* icon_note] Be careful when flipping up the logic board. The headphone jack and docking port are attached to the board.
-	[* black] Gently lift the logic board (and attached components) upward.
+	[* black] Gently lift the logic board (and attached components) upward. The side with the battery wire and orange cable will move, but the docking port end will be "hinged" by several small ribbon cables.
+	[* black] The smaller portion of the logic board that resides underneath can be left in place for some screen repairs.
	[* icon_note] The smaller portion of the logic board that resides underneath is very bendable and frail. Make sure not to pull the spudger upward when using it to detach the small board. Use only side-to-side movement.
	[* black] Slide the spudger under the small portion of the logic board. The board should come loose once the spudger has slid almost all the way to the other side.