Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Brett Hartt

Düzenleme onaylandı tarafından Brett Hartt

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Using a 3/83/8" wrench inwith your left hand, open the bleed valve on the front brake cylinder.
[* black] The built upbuilt-up pressure in the lines will force some of the brake fluid out of the lines.
[* black] Using a 3/83/8" wrench inwith your left hand, open the bleed valve on the front brake cylinder.
[* black] The built upbuilt-up pressure in the lines will force some of the brake fluid out of the lines.
[* black] Continue to force more brake fluid out of the brake lines by depressing the front brake lever with your right hand.
[* icon_caution] While bleeding the brakes, focus on the bleeder hose. If you see an air bubble traveling up the bleed hose, close the bleed valve immediately, and begin the process again.
[* black] Once the brake lever is completely depressed, quickly close the bleed valve, making sure that no air bubbles enter into the brake lines.