Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Miroslav Djuric

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_note] Attach the black lead first, followed by the white lead, and finish with the red lead.
+[* icon_note] Attach the black lead first, followed by the erd lead, and finish with the white lead.
[* black] Place the wire from the new battery onto the new solder bead.
[* black] Press the tip of the soldering iron onto the solder bead until it melts.
[* black] Slide the wire lead into the liquid solder until the wire goes through the center of the bead, then remove the soldering iron.
[* black] Continue with the other two connections the same way, taking special care not to solder two of the connectors together.