4. Adımdaki Değişiklikler
Düzenleyen: Trammell Hudson —
Düzenlenme reddedildi tarafından Andrew Optimus Goldheart
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_caution] To remove the logic board, the two cylindrical rods of the Mac Mini Logic Board Removal Tool must be inserted into the holes highlighted in red. Inserting instruments into any logic board holes other than the ones highlighted in red may destroy the logic board. | |
| - | [* black] Insert the [product|IF145-159|Mac Mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding. |
| + | [* black] Insert the [product|IF145-159|Mac Mini Logic Board Removal Tool] into the two holes highlighted in red. Be sure it makes contact with the top side of outer case below the logic board before proceeding. If you do not have the official tool, a long M3 hex key can be used very carefully in one side at a time. |
| [* black] Carefully pull the tool toward the I/O board. The logic board and I/O board assembly should slightly slide out of the outer case. | |
| [* icon_note] Cease prying when the I/O board is visibly separated from the outer case. | |
| [* black] Remove the Mac Mini Logic Board Removal tool. |