Ana içeriğe geç

9. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Guide the new filter back up and around the drive shaft.
[* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn clockwise by hand until the filter is snug.
[* icon_caution] If the filter is difficult to turn at the beginning of it's threads ***stop***! You may be cross threading the oil filter. Re-align the oil filter and try again.
- [* icon_caution] Do not over-tighten or you may strip the oil filter threads.
+ [* icon_caution] Do not over-tighten the oil filter or you may strip the oil filter threads.
[* black] Remove the oil drain pan out from under the car.