1995-2001 Honda CRV Oil Change 9 No'lu Adım Geçmişi

9. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi — 1 Eyl 2011

-	[* black] Guide the new filter back up and around the drive shaft.
-	[* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn clockwise by hand until the filter is snug.
-	[* icon_caution] If the filter is difficult to turn at the beginning of it's threads *stop*! You may be cross threading the oil filter. Re-align the oil filter and try again.
-	[* icon_caution] Do not over-tighten the oil filter or you may strip the oil filter threads.
-	[* black] Remove the oil drain pan out from under the car.
+	[* black] Guide the new filter back up and around the drive shaft, being careful not to get dirt or debris on the seal of the oil filter.
+	[* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn the filter clockwise by hand until it is snug.
+	[* icon_caution] If the filter is difficult to turn at the beginning of its threads *stop*! You may be cross threading the oil filter. Re-align the oil filter and try again.
+	[* black] Remove the oil drain pan from under the car.