1995-2001 Honda CRV Oil Change 9 No'lu Adım Geçmişi

9. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi — 1 Eyl 2011

	[* black] Guide the new filter back up and around the drive shaft, being careful not to get dirt or debris on the seal of the oil filter.
-	[* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn the filter clockwise by hand until it is snug. It should require a moderate amount of your strength but not all of it.
+	[* black] Place the threaded end of the oil filter onto the engine's oil filter threads and turn the filter clockwise by hand until it is snug. It should require a moderate amount of your strength, but not all of it.
	[* icon_caution] If the filter is difficult to turn at the beginning of its threads, *stop*! You may be cross threading the oil filter. Re-align the oil filter and try again.
	[* black] Do not over-tighten your oil filter by using a wrench. Doing so may cause the oil filter seal to leak and will make removing the oil filter very difficult in the future.
	[* black] Remove the oil drain pan from under the car.