Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: mpalma

Düzenlenme reddedildi tarafından Walter Galan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Pull the hard drive away from the front edge of the mini and remove it from the outer case.
[* icon_note] During reassembly, there are two pins on the inside edge of the hard drive that fit into the case. The holes have rubber grommets around them, so it may be difficult to tell when you have seated the hard drive correctly.
+[* black] I found it helpful to slide the spudger between the 2 drives so that you could slightly lift up the back side of the drive to easily align the 2 screw/pins into the grommets.

Resim 3

Önceki resim yok

Eklendi