Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

2. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart

Düzenleme onaylandı tarafından Sam Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Continue heating and prying untilIn the following steps you can liftwill be cutting the battery outadhesive under the battery, and prying it off of the rear case.
[*

[*
red] This image shows the location ofThe adhesive is laid out as shown in this image: two strips holdingalong the batterylong edges, and two shorter strips perpendicular in placethe center.
[* black] To avoid damaging the battery, use plastic tools, heat, and patience. Do not puncture, bend, or overheat the battery.
[* black] Do not pry near the logic board, you could damage your iPad
.
[* black] Continue heating and prying untilIn the following steps you can liftwill be cutting the battery outadhesive under the battery, and prying it off of the rear case.
[*

[*
red] This image shows the location ofThe adhesive is laid out as shown in this image: two strips holdingalong the batterylong edges, and two shorter strips perpendicular in placethe center.
[* black] To avoid damaging the battery, use plastic tools, heat, and patience. Do not puncture, bend, or overheat the battery.
[* black] Do not pry near the logic board, you could damage your iPad
.

Resim 1

Eski Sürüm

Yeni Sürüm