Ana içeriğe geç

18. Adımdaki Değişiklikler

Düzenleyen: Bob Somers

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[*title] Modify your clips.
[* icon_note] Due to a tiny mistake in my batch of kits, the front of the breech will block the top of the magazine from inserting all the way. Check the fit in your blaster before you do this step.
[*
black] Insert wisdom hereIt's an easy fix that won't affect the use of the modified clips in your other blasters.
[* red] Using a rotary tool or file, grind down the back corner of the top of the clip.
[* black] Keep grinding and testing the fit in your blaster. You don't need to take off much.
[* icon_caution] Make sure you are grinding down the correct corner! It should be the corner closest to the rear end of your darts when loaded correctly
.
[*title] Modify your clips.
[* icon_note] Due to a tiny mistake in my batch of kits, the front of the breech will block the top of the magazine from inserting all the way. Check the fit in your blaster before you do this step.
[*
black] Insert wisdom hereIt's an easy fix that won't affect the use of the modified clips in your other blasters.
[* red] Using a rotary tool or file, grind down the back corner of the top of the clip.
[* black] Keep grinding and testing the fit in your blaster. You don't need to take off much.
[* icon_caution] Make sure you are grinding down the correct corner! It should be the corner closest to the rear end of your darts when loaded correctly
.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm

Resim 3

Önceki resim yok

Eklendi