Ana içeriğe geç

22. Adımdaki Değişiklikler

Düzenleyen: Sam Goldheart

Düzenleme onaylandı tarafından Sam Goldheart

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board.
[*
black] Slide the plastic card upunder the sidelogic board, toward the top of the logic board to break upiPad, near the adhesive holding it in placecameras.
[* black] Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board.
[*
black] Slide the plastic card upunder the sidelogic board, toward the top of the logic board to break upiPad, near the adhesive holding it in placecameras.
[* icon_note] If the logic board adhesive provides too much resistance, reheat your iOpener and lay it on the rear case to soften the glue.