Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Turn the two hex bolts in the front tank mounts counter-clockwise with a 10 mm box end wrench or socket wrench until they come out.
- [* icon_note] To remove these bolts you will either need to use a socket wrench with an extension or you will need to turn the handle bars to get adequate clearance for your tool.
-[* black] Turn the two hex bolts holding the tank's hinge base counter-clockwise with a 10 mm socket wrench or box end wrench until they come out.
+[* black] Turn the two 10mm hex bolts in the front tank mounts counter-clockwise with a box end wrench or socket wrench until they come out.
+ [* icon_note] To remove these bolts you will either need to use a socket wrench with an extension, or you will need to turn the handle bars to get adequate clearance for your tool.
+[* black] Turn the two 10mm hex bolts in the tank's hinge base counter-clockwise with a socket wrench or box end wrench until they come out.