5. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the spark plug cap from cylinder 1. | |
| - | [* icon_caution] Do not remove the cap by pulling on the wires, you risk ripping the |
| + | [* icon_caution] Do not remove the cap by pulling on the wires, you risk ripping the wire out of the cap. |
| [* black] Use a 5/8" spark plug driver, a socket extension and a socket wrench to remove the spark plug. Press the spark plug driver firmly onto the spark plug until you feel it "grab" the plug and turn it counter-clockwise until you can pull it out of the cylinder head. | |
| - | [* icon_caution] Be careful not to drop anything down the spark plug hole! If something falls into the cylinder you will have to do a complete cylinder tear down to remove what ever was dropped! |
| + | [* icon_caution] Be careful not to drop anything down the spark plug hole and into the cylinder! If something falls into the cylinder you will have to do a complete cylinder tear down to remove what ever was dropped! |
| [* black] If you are replacing or inspecting your spark plugs as part of an engine daignosis, [http://www.tomosmopeds.org/manuals/a35manual/a3518.jpg|reading your plugs] can tell you a little about what is going on inside your engine. |