Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Just likeLike the [guide|62348|Huawei P9|stepid=131134|new_window=true], the MX6 seems to have takeninspired by the iPhone in more than just looks from the iPhone's design. The MX6 featureslooks: two Pentalobe screws that secure the MX6's display assembly to the chassis.
[* icon_note] We're still baffled as to why manufacturers are choosing towould copy Apple's proprietary screw designdesign, when a regular 'olol' Phillips or Torx screw will dodoes the jobsame job with less hassle.
[* black] Just likeLike the [guide|62348|Huawei P9|stepid=131134|new_window=true], the MX6 seems to have takeninspired by the iPhone in more than just looks from the iPhone's design. The MX6 featureslooks: two Pentalobe screws that secure the MX6's display assembly to the chassis.
[* icon_note] We're still baffled as to why manufacturers are choosing towould copy Apple's proprietary screw designdesign, when a regular 'olol' Phillips or Torx screw will dodoes the jobsame job with less hassle.
[* black] Ruh Roh Raggy! We also see the same [guide|60902|fingerprint sensor cable trap|stepid=127178|new_window=true] as in the iPhone 5s/SE's!
[* icon_note] Not to worry Scooby Doo, Meizu cut us some extra slack, so the cable was more forgiving when lifting the display away from the home button.
[* black] Unlike the iPhone's terrible spring bracket clip, the MX6's fingerprint cable is connected under a screwed down tamper-evident bracket. The jury's still out on whether this design is any better.