Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Brittany McCrigler

Düzenleme onaylandı tarafından Brittany McCrigler

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Like the [guide|62348|Huawei P9|stepid=131134|new_window=true], the MX6 seems inspired by the iPhone in more than just looks: two Pentalobe screws secure the MX6's display assembly to the chassis.
[* icon_note] We're still baffled as to why manufacturers would copy Apple's screw design, when a regular ol' Phillips or Torx screw does the same job with less hassle.
[* black] Ruh Roh Raggy! There appears to be a [guide|60902|fingerprint sensor cable booby trap|stepid=127178|new_window=true] like in the iPhone 5s/SE!
[* black] Not to worry, Scooby Doo— Meizu cut us some slackslack (literally), so the cable is more forgiving when lifting open the display.
[* icon_caution] Just don't forgeticon_note] While a bit of extra cable is nice, it doesn't make up for the tricky display removal. You'll have to remove the screwed-down, tamper-evident bracket,bracket and disconnect disconnect the sensor cable before attempting to remove the display.
[* black] Not to worry, Scooby Doo— Meizu cut us some slackslack (literally), so the cable is more forgiving when lifting open the display.
[* icon_caution] Just don't forgeticon_note] While a bit of extra cable is nice, it doesn't make up for the tricky display removal. You'll have to remove the screwed-down, tamper-evident bracket,bracket and disconnect disconnect the sensor cable before attempting to remove the display.