14. Adımdaki Değişiklikler
Düzenleyen: Miroslav Djuric —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Route the black thermal sensor wire back through the notch. |
|---|---|
| [* black] Secure the thermal sensor to the new hard drive. The original adhesive on the back of the thermal sensor should hold the sensor in place. | |
| + | [* black] Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive. |
| [* black] Reuse the black tape from the old drive to secure the thermal sensor wire to the new drive. |