16. Adımdaki Değişiklikler
Düzenleyen: Walter Galan —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] When setting the internal framework into the bottom housing, make sure the male connector on the interconnect board finds its way into the female connector on the logic board |
|---|---|
| [* black] The antenna boards can be snapped back into their respective posts, as shown | |
| [* black] Tape the upper right antenna cable to the side of the internal framework (indicated in green) | |
| [* black] Route the bottom left antenna cable through the guides on the internal framework (marked in yellow) | |
| [* black] Connect the orange ribbon cable from the interconnect board to the sound card (indicated in red) |