2. Adımdaki Değişiklikler
Düzenleyen: wizzl dizzl —
Düzenleme onaylandı tarafından wizzl dizzl
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] You should test the plug with a wire and a Volt Ohm meeter. As not to damage the plug. Find the schematic and DYODD. I, to speed things up, plugged just the board in and jumped the leeds off the positive side, indicated with a +, of the C1 compasator to the voltage regulator 78dl05 (printed on the regulator its self). |
|---|---|
| + | [* black] The controll panel on this '01 model just has 2 screws on the bottom. Pull it out working your way up from the bottom. |
| + | [* black] Remove all plugs. And temp controll knob. On the back are gold screws holding on the black controll board cover. Twist the black LED with the black wires showing, counter clockwise and gently remove the board. Free each corner and lift straight up. |