Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

8. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Place the upper casing on its edge and use a spudger to push the keyboard away from the casing, poking the spudger through the central keyboard screw hole. Grasp the keyboard as it separates from the casing.
[* black] Maintaining your hold on the keyboard, lay the casing flat and gently bow the keyboard until the two tabs on either side of the keyboard come free.
[* black] Slide the keyboard away from the trackpad and out of the upper case.
[* blackicon_note] When installing the new keyboard, remember to slip the keyboard backlight ribbon cable through the slot in the top casing.
[* blackicon_note] When installing the new keyboard, remember to slip the keyboard backlight ribbon cable through the slot in the top casing.