Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

2. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] While working from the inner side of the bracket, push the small side of the thinner grommet through the hole in the side of the bracket boxed in orange on the last stepbracket.
[* black] While working from the inner side of the bracket, push the small side of the thinner grommet through the hole in the side of the bracket boxed in orange on the last stepbracket.
[* black] Be sure the grommet is seated nicely in the bracket as seen in the third picture.
[* black] Repeat the process for the second grommetremaining three grommets on this sideeither sides of the bracketbrackets.
[* black] Repeat the process for the second grommetremaining three grommets on this sideeither sides of the bracketbrackets.