Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

9. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Insert wisdom hereUse a 1.5 mm hex bit to install the set screws on the side of the hard drive closest to the end of the hard drive cable that attaches to the logic board.
[* icon_caution] Be sure you are installing them on the correct side of the hard drive.
[* black] Tighten the screws until they contact the end of the threaded holes in the side of the hard drive. They are shown correctly installed in the third picture
.
[* black] Insert wisdom hereUse a 1.5 mm hex bit to install the set screws on the side of the hard drive closest to the end of the hard drive cable that attaches to the logic board.
[* icon_caution] Be sure you are installing them on the correct side of the hard drive.
[* black] Tighten the screws until they contact the end of the threaded holes in the side of the hard drive. They are shown correctly installed in the third picture
.

Resim 2

Önceki resim yok

Eklendi

Resim 3

Önceki resim yok

Eklendi