How to Jack Up a Car (or Truck) 7 No'lu Adım Geçmişi

7. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen — 6 Eyl 2016

Düzenleme onaylandı tarafından Jeff Suovanen

-	[* black] Insert wisdom here.
+	[* black] Pump the jack handle up and down repeatedly to begin raising your vehicle.
+	[* icon_caution] It's best to watch the jack where it makes contact with the vehicle to make sure it stays seated properly as you raise it.
+	[* black] If this isn't practical, pause after raising the vehicle an inch or two and take a quick look to verify that the jack has made good contact with the jack point.
+	[* black] If necessary, lower the jack back down by slightly opening the release valve. Then close the release valve, and reposition the jack so that it makes better contact with the jack point.
+	[* black] Continue raising your vehicle until it reaches the desired height. (This should be just high enough to allow you to put a jack stand in place.)