Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Justin Winchester

Düzenleme onaylandı tarafından Justin Winchester


Adım Satırları

+[* black] Next I attached the temperature sensor to the SSD, while keeping the cables as organized and compact as possible.
+[* black] Here I also secured the SSD down to the iMac with some 3M adhesive squares. Since the iMac is curved right here I needed something that would hold it in place but was also thicker than most adhesives.
+[* black] I used four squares total, but I doubled them up. Stacking one on top of another twice; once on the back left and once on the front right.

Resim 1

Önceki resim yok