Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

3. Adımdaki Değişiklikler

Düzenleyen: Paige Reisman

Düzenleme onaylandı tarafından Paige Reisman

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
[* black] Insert the flat end of a spudger into the gap.
[* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial
gap betweentakes a significant amount of force. If you're having a hard time opening a gap, rock the rear casescreen up and display assemblydown to weaken the adhesive until you can fit a spudger inside.
[* black] Insert the flat end of a spudger into the gap.
[* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial
gap betweentakes a significant amount of force. If you're having a hard time opening a gap, rock the rear casescreen up and display assemblydown to weaken the adhesive until you can fit a spudger inside.
[* black] While pulling up on the suction cup, twist the spudger to widen the opening between the screen and rear case.