Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Taylor Atterbury

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* blackicon_note] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* blackicon_note] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* red] Remove the two 6.6mm screws located on the right and left side of the metal casing. Use a Phillips #2 screwdriver to remove all four.