10. Adımdaki Değişiklikler
Düzenleyen: Andrew Optimus Goldheart —
Düzenleme onaylandı tarafından Andrew Optimus Goldheart
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Lift up the left side of the logic board and disconnect the gray and black power cable from the bottom of the board. |
| [* icon_note] Pull the power cable connector parallel to the face of the logic board. |
| [* black] Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case. |
| [* icon_note] To properly reassemble your MacBook Pro, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces. |