Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Jim —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Set aside the printer body.
[* black] Unscrew the 2.74 mm Torx screw and remove the plastic holder tab holding the glass in place.
-[* icon_caution] Carefully lift the scanner glass panel above the plastic barrier and pull it towards the control panel circuitry. It can take quite a bit of farce to get the panel to slide out.
+[* icon_caution] Carefully lift the scanner glass panel above the plastic barrier and pull it towards the control panel circuitry. It can take quite a bit of force to get the panel to slide out.