1. Adımdaki Değişiklikler
Düzenleyen: Jim —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Set aside the printer body. | |
| - | [* red] Unscrew the |
| + | [* red] Unscrew the T10 14 mm Torx screw. |
| [* black] Remove the plastic tab holding the glass in place. | |
| - | [* violet] move lifiting glass to new step, and add pic of the tabs and what not. |
| [* icon_caution] Carefully lift the scanner glass panel above the plastic barrier and pull it towards the control panel circuitry. It can take quite a bit of force to get the panel to slide out. If not removed carefully, the scanner glass can shatter |