Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Dan

Düzenleme onaylandı tarafından Adam O'Camb

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.
[* black] Pull the chip directly out from its connector.
[* icon_note] If there are two RAM chips installed, repeat the above procedure for the second chip.
[* icon_caution] When reinstalling the logic board, be sure to installclean off the old thermal paste fully and apply a new layer of thermal paste on the three processorschips (CPU, GPU & PCH). We have a [guide|744|guide] that makes it easygoes offer how.
[* icon_caution] When reinstalling the logic board, be sure to installclean off the old thermal paste fully and apply a new layer of thermal paste on the three processorschips (CPU, GPU & PCH). We have a [guide|744|guide] that makes it easygoes offer how.