Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Jim

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Remove the power button circuit board from the support frame by pinching the left side, pulling forward and to the left simultaneously.
[* blue] Push up on the tab holding the secondary control circuit board with the spudger and pull it forward to remove it.
[* blue] Push up on the tab holding the secondary control circuit board with the spudger and pull it forward to remove it.
[* icon_caution] Be careful not to pull to hard on the cable connecting the power button control circuit board and the secondary control circuit board to the logic board