Ana içeriğe geç

Bu Adımdaki Değişiklikler

Düzenleyen: Robert Spencer Harrison

Düzenleme onaylandı tarafından Robert Spencer Harrison

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Three flat screws will now be visible where the battery was located. Use a Philips(PH1) head screwdriver to remove the 2mm screws.
[* red] Three flat screws will now be visible where the battery was located. Use a Philips(PH1) head screwdriver to remove the 2mm screws.
[* black] Flip the 4520s over, and rotate it 180 degrees so that the back is facing you.
[* orange] Peel off the two rubber caps on either side of the battery portport using a metal spudger.
[* yellow] Behind each cap is a screw. Use a Philips(PH1) head screwdriver to remove the 3mm screws.
[* orange] Peel off the two rubber caps on either side of the battery portport using a metal spudger.
[* yellow] Behind each cap is a screw. Use a Philips(PH1) head screwdriver to remove the 3mm screws.