Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Robert Spencer Harrison

Düzenleme onaylandı tarafından Robert Spencer Harrison

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Slide the keyboard panel away from you, and gently raise up the keyboard 3 inches; a ribbon cable will be visible underneathyou.
[* icon_noteicon_caution] Do not yank the keyboard panel away from the 4520s. This may damage the cable.
[* black] Gently raise up the keyboard 3 inches; a ribbon cable will be visible underneath.
[* red] Slide the keyboard panel away from you, and gently raise up the keyboard 3 inches; a ribbon cable will be visible underneathyou.
[* icon_noteicon_caution] Do not yank the keyboard panel away from the 4520s. This may damage the cable.
[* black] Gently raise up the keyboard 3 inches; a ribbon cable will be visible underneath.
[* orange] Gently disconnect the ribbon cable from the motherboard by carefully lifting the tab upwards one side at a time.
[* black] The ribbon cable will now be loose. Lift the keyboard panel up and set it aside.
[* icon_reminder] When reassembling, insert the ribbon cable into the port and press the tab down into the port, pinching the cable into place.

Resim 1

Eski Sürüm

Yeni Sürüm