Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Robert Spencer Harrison

Düzenleme onaylandı tarafından Robert Spencer Harrison

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* redblack] Slide the keyboard panel away from you.
[* redblack] Slide the keyboard panel away from you.
[* icon_caution] Do not yank the keyboard panel away from the 4520s. This may damage the cable.
[* black] Gently raise up the keyboard 3 inches; a ribbon cable will be visible underneath.
[* orange] Gently disconnectred] Disconnect the ribbon cable from the motherboard by carefully lifting the tab upwards one side at a time.
[* orange] Gently disconnectred] Disconnect the ribbon cable from the motherboard by carefully lifting the tab upwards one side at a time.
[* black] The ribbon cable will now be loose. Lift the keyboard panel up and set it aside.
[* icon_reminder] When reassembling, insertfeed the ribbon cable into the port and pressand hold it in place. Press down on the tab down intoconnected to the port, pinching the cable into place.
[* icon_reminder] When reassembling, insertfeed the ribbon cable into the port and pressand hold it in place. Press down on the tab down intoconnected to the port, pinching the cable into place.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 3

Eski Sürüm

Yeni Sürüm