Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Nicholas Caruso

Düzenleme onaylandı tarafından Nicholas Caruso

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Gently raise up the keyboard and rotate it backward; a ribbon cable will be visible underneath.
[* red] Disconnect the ribbon cable from the motherboard by carefully lifting the tab upwards one side at a time.
[* black] The ribbon cable will now be loose. LiftDisconnect the cable and lift the keyboard panel up and setup. Set it aside.
[* black] The ribbon cable will now be loose. LiftDisconnect the cable and lift the keyboard panel up and setup. Set it aside.
[* icon_reminder] When reassembling, feed the ribbon cable into the port and and hold it in place. Press down on the tab connected to the port, pinching the cable into place.