9. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] The voltage regulator has 3 pins: | |
| [* red] Pin 1: V in (5 V) | |
| [* orange] Pin 2: V out (3.3 V) | |
| [* yellow] Pin 3: "Adjust" | |
| [* black] Use a pair of pliers to carefully bend pin 1 down 90°, pin 3 up 90° and pin 2 up as far as possible without touching pin 3. | |
| [* icon_note] Do not worry about getting exact angles, as you will likely need to adjust the pins when you go to fit the IC to the PCB. | |
| + | [* icon_caution] Do not repeatedly bend and unbend the pins, as repeated bending will weaken the metal and eventually cause it to break. |