13. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Press the 240 Ω resistor through the holes indicated in step 9. Direction of the resistor does not matter. |
|---|---|
| - | [* black] Solder the resistor into place and clip off the excess leads. |
| + | [* black] Insert the leads of the 240 Ω resistor through the holes indicated in step 9. Direction of the resistor does not matter. |
| + | [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 9 or 10. |
| + | [* black] Solder the resistor to the PCB and clip off the excess leads. |