13. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Insert the leads of the 240 Ω resistor through the holes indicated in step 9. Direction of the resistor does not matter. | |
| - | [* icon_note] Be sure to route the leads so that they do not cover any |
| + | [* icon_note] Be sure to route the leads so that they do not cover any of the indicated holes in step 9 or 10. |
| [* black] Solder the resistor to the PCB and clip off the excess leads. |