15. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Insert the leads of the 1 µF capacitor through the holes indicated in step 9. Direction of the capacitor does not matter. | |
| - | [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 9 or 10. Also do not allow the leads contact the leads of other components. |
| + | [* icon_note] Be sure to route the leads so that they do not cover any needed holes from step 9 or 10. Also, do not allow the leads to contact the leads of other components. |
| [* black] Solder the capacitor to the PCB and clip off the excess leads. |