33. Adımdaki Değişiklikler
Düzenleyen: Phillip Takahashi —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Pour a small amount of the plastic beads that were included with the kit into a heat- and stick-resistant container. | |
| [* black] Use a heat gun to heat the plastic beads until they turn transparent. | |
| [* icon_note] Most hair driers are also capable of melting the beads. If neither a hair drier of sufficient power nor a heat gun are available to you, you can also try boiling them and straining them out of the boiling water. | |
| - | [* |
| + | [* icon_note] When using a heat gun or hair dryer, be sure to turn the heat to high but leave the fan on low, or you will blow the beads out of the container! |