Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: jg44070

Düzenlenme reddedildi tarafından Jake Devincenzi

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screw.
[* black] Use a plastic opening tool to gently detach the battery connector from the device.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This maywill come loose while prying the battery connector from its socket.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This maywill come loose while prying the battery connector from its socket.