Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Düzenleme onaylandı tarafından David Hodson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.
[* icon_caution] Be careful not to break any components off the surrounding area on the logic board as you pry upwards.
[* black] Remove the rear camera from the iPhone.
+[* icon_reminder] There is a small rubber gasket that sits underneath the rear-facing camera. Make sure that it is properly seated before reassembly.