Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_note] The 3.5 mm Phillips screw indicated below with a red circle may be absent in some models.
-[* black] Remove the following 5 screws and 3 nuts from the heat sink:
+[* black] Remove the following 7 screws and 2 nuts from the heat sink:
[* red] One 3.5 mm Phillips from the lower left corner of the heat sink.
- [* orange] Three 6 mm Phillips from around the fan.
+ [* orange] Five 6 mm Phillips from around the fan and at the center of the heat sink.
[* yellow] One 7.5 mm Phillips at the top right corner of the heat sink.
- [* green] One 4 mm nut from the side of the heat sink.
- [* blue] Two 4 mm screw nuts with attached springs from either side of the heat sink.
+ [* green] Two 4 mm screw nuts with attached springs from either side of the heat sink.

Resim 1

Önceki resim yok

Eklendi