Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Walter Galan

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

+[* icon_note] The 3.5 mm Phillips screw indicated below with a red circle may be absent in some models.
+[* black] Remove the following 5 screws and 3 nuts from the heat sink:
+ [* red] One 3.5 mm Phillips from the lower left corner of the heat sink.
+ [* orange] Three 6 mm Phillips from around the fan.
+ [* yellow] One 7.5 mm Phillips at the top right corner of the heat sink.
+ [* green] One 4 mm nut from the side of the heat sink.
+ [* blue] Two 4 mm screw nuts with attached springs from either side of the heat sink.