2. Adımdaki Değişiklikler
Düzenleyen: Christopher Adams —
Düzenleme onaylandı tarafından Christopher Adams
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* icon_note] This step is not necessary but will make the process of removing the faceplate much easier. | |
| [* black] Refer to the [guide|11677|iOpener instructions] for how to heat up and use the iOpener. | |
| - | [* black] Apply the heated iOpener to the front of the GoPro for a few |
| - | [* icon_caution] The heated iOpener is very hot and can burn your hands. |
| + | [* black] Apply the heated iOpener to the front of the GoPro for a few minutes to melt the adhesive under the faceplate. |
| + | [* icon_caution] The heated iOpener is very hot and can burn your hands. Avoid burns by using towels or gloves to hold the iOpener. |