Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Adam Dierkes

Düzenleme onaylandı tarafından Adam Dierkes

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Use the PH #1 bit to remove one 8 mm screw located above the wire on the casing.
- [* orange] Then use the same bit to remove two 10 mm screws found at the bottom.
+[* red] Use the PH#1 bit to remove one 8mm screw located above the wire on the casing.
+ [* orange] Then use the same screw bit to remove two 10mm screws found at the bottom.