6. Adımdaki Değişiklikler
Düzenleyen: Robert Comstock —
Düzenleme onaylandı tarafından Robert Comstock
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Slowly remove the upper half of the plastic case about halfway. There is a ribbon cable that's connects the cover and the control board. | |
| - | [* |
| + | [* red] Follow the ribbon to the control board and locate the connector that connects the cable to the control board. |
| [* black] Press the tab on the side of the connector and pull up on the cable. | |
| [* black] Continue to remove the shell the rest of the way. |