3. Adımdaki Değişiklikler
Düzenleyen: Roger Pena —
Düzenleme onaylandı tarafından Roger Pena
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Insert |
|---|---|
| + | [* black] Insert an IFixit opening tool between the seam of the back panel and front casing to create initial opening. |
| [* black] Use a metal spudger to insert within the opening to pry open the back panel. | |
| [* black] Move the metal spudger down the seam, prying the back panel open as you go. | |
| [* black] Once a large enough opening is made, pry the entire back panel off with your hand. | |
| [* icon_caution] You will hear a loud popping from the magnetized latches which is not causing damage to the device and will require some force to open. |